top of page
Heat Pump Split Systems
A heat pump split system consists of two sides of the system in separate areas. Does your home have an outdoor unit and an air handler on the inside of the house? Perhaps the air handler is in the attic, garage, or a closet in the hallway. Okay great! Now you know you have a split system. Now, do you know if your indoor unit runs on gas or propane? If so, you have a "gas/electric split system." If it doesn't, and you know your indoor unit or heat is provided by electric, you probably have a "heat pump split system."
Bronze
Single-Stage
Heating and Cooling
XR15 Heat Pump
M Series Air Handler
A smart solution to your home heating and cooling needs, the XR15 heat pump with the M series air handler is our most affordable heat pumps with an excellent blend of efficiency and value.
SEER ratings of up to 16 and 9.5 HSPF heats and cools your home easily on the most extreme days of the year.
TEM6 air handler features a variable speed motor and Comfort-R technology for more efficient air flow for whole-home comfort.
Cooling Stages: Single-Stage and up to 16 SEER
Heating Stages: Single-Stage and up to 9.5 HSPF
Energy savings: 50%
Energy Star rated: Yes
Climatuff™ compressor
Spine Fin™ outdoor coil
Upgraded condenser fan motor
Insulated furnace blower compartment
All-Aluminum air handler coil
Non-rust polymer drain pan
Silver
.png)
Two-Stage
Heating and Cooling
XR17 Heat Pump
M Series Air Handler
The heating and cooling reliability you expect from Trane and the energy efficiency you deserve can be found in our XR17 two-stage electric heat pump.
The XR17 offers up to a 17.25 SEER rating when matched with Trane variable speed air handlers, furnaces and Comfort Coils™.
Two-Stage systems have a 70% speed in first -stage and 100% speed in second-stage. This system will run in first stage the majority of the time saving you so much more than your old single-stage system.
Cooling Stages: Two-Stages and 17.25 SEER
Heating Stages: Two-Stages and 9.6 HSPF
Energy Savings: 55%
Energy Star Rated: Yes
Two-Stage Climatuff™ compressor
Spine Fin™ outdoor coil
Upgraded condenser fan motor
All-Aluminum air handler coil
Non-rust polymer drain pan
Gold
Variable Speed
Heating and Cooling
XV18 Heat Pump
Hyperion Series Air Handler
Variable Speed units continuously communicate with each other and your Trane thermostat to provide optimal efficiency.
Rated up to 18 SEER with 700 stages of comfort for ultimate climate control and max efficiency.
Variable-speed blower motors adjust speed to provide a consistent flow of warm, comfortable air with quiet operation Advanced ComfortLink™ II communicating technology constantly calibrates itself for optimal performance year after year.
Cooling Stages: 700 stages and 18 SEER
Heating Stages: 700 stages and 10 HSPF
Energy Savings: 56%
Energy Star Rated: Yes
ComfortLink™ II communicating capability
refrigerant-cooled inverter drive
Climatuff™ variable speed compressor
All-aluminum Spine Fin™ coil
Integrated fan system
Variable speed blower motor
Recognized Most Efficient of Energy Star in 2019
Click Here to See A
General Price *
NOTE FOR WEB DEVELOPER:
When clicked this should reveal our price for a 2-ton to 5-ton system, which is:
$12,600 to $15,100 depending on the size of the system
Click Here to See A
General Price *
NOTE FOR WEB DEVELOPER:
When clicked this should reveal our price for a 2-ton to 5-ton system, which is:
$14,500 to $17,600 depending on the size of the system
NOTE FOR WEB DEVELOPER:
Can we make a box that comes up when you hover these "Click Here..." buttons to say:
PRICE RANGES: Price ranges shall apply to basic installation. All price ranges are subject to adjustment based on the unique characteristics of the home. Any changes or modifications to Basic Installation agreed upon by Buyer will be an additional cost as negotiated by Buyer and the Fox family Heating & Air.
The reason I was thinking to do it this way was for the web developer to use for further search on who and how many people are looking at these prices.
Click Here to See A
General Price *
NOTE FOR WEB DEVELOPER:
When clicked this should reveal our price for a 2-ton to 5-ton system, which is:
$17,500 to $20,000 depending on the size of the system
Typical Installations Include:
• The proper building permit
• Title 24 Testing - (Airflow, Duct Leakage, Refrigerant Charge Tests)
• Removing and disposal of the existing system
• An easy-access filter base (for upflow/downflow systems)
• A new secondary drain pan (for attic split systems)
• Modifying the existing supply plenum
• Modifying the existing return plenum
• Reconnecting to the existing ductwork
FOX FAMILY EXTRAS YOU’LL RECEIVE:
• 2-YEARS PREVENTIVE MAINTENANCE – We’ll come out twice a year for the first two years, once in the spring/summer, and once in the fall/winter to test and clean your new system and keep it running in top shape. Nothing is due when we come out for this service.
• COMPRESSOR START KIT - This will extend the life of your new system by taking some of the load off of starting the system up thousands of times over its lifespan.
• CONDENSATE SAFETY SWITCH – This will be your personal watchdog for any condensate drainage that may clog in the pipes. This switch will shut down the system if it senses a problem.
• COMPRESSOR SOUND BLANKET – This will muffle the sound of your already very quiet new system by another 45%. Talk about whisper quiet!
WARRANTIES:
• 10 Years Parts Warranty
• 10 Years Compressor Warranty* (12 Years on the XV18)
• 2 Years Labor Warranty
• 2 Years Preventive Maintenance – To receive a full 10 years labor warranty, just continue your paid maintenance with us from years 3 through 10 and pay nothing for any repairs for the first 10 years.**
*Subsequent owners warranty will reduce to 5 years parts/compressor from date of install.
**Subsequent owners will not have the extended labor warranty option available.
• A new Honeywell 9000 WiFi/Smart Thermostat
• The proper breakers at the main electrical panel
• A new high voltage service disconnect and wiring for AC
• A new foundation pad for the heat pump
• A precision refrigerant charge
• New smoke detectors and CO monitors (as needed)
• Complete clean up
Why we Choose Trane HVAC Systems for Fox Families
Fox Family Heating and Air and Trane Technologies have been partners since 2015. The reason we choose to install Trane equipment in your home all comes down to this. We repair Trane air conditioners way less than any other brand on the market.
Here are some other reasons:
Superiority - Trane systems are highly flexible. They are engineered to offer options in terms of capacity, airflow, humidity control, air filtration, energy use and operating efficiency.
Adapatability - You can take any Trane system and connect to your existing ductwork. Do you have a zoned cooling system? Trane connects right back up to your current setup so you don't have to purchase everything from scratch.
Durability - Weatherguard fasteners steadfast and rust resistant. The integrated G90 steel cabinet is powder painted louvers for protection on all sides of the unit. A Duratuff basepan withstands and 800 lb load over 20 years. It won't crack, warp, corrode, or rust out.
Laboratory Testing - Trane's Systems Extreme Environmental Test Laboratory (SEET) is an extreme weather laboratory. All of Trane’s testing procedures are conducted at much higher extremes and in more stressful conditions than the rest of the industry.
Real World Testimony - The environment outdoors is a powerful corrosive force. The outdoor environment is harsh, with dramatic swings in temperature, precipitation, wind and humidity. Sacramentans have been choosing Trane for their air cconditioner replacement for decades for so many reasons. But the biggest reason is, other systems don't last as long and keep their efficiency longer than a Trane air conditioner.
Spine-Fin Coils - Trane is the only brand that uses spine technology. It's made in a way that maintains it's efficiency longer than traditional radiator style coils that come with every other brand. The spines create more surface area, so the heat exchanging process is more consistent even as the AC gets dirty. Check out this chart on Trane's website:
Trane designs and manufactures their products to be as reliable and durable as possible. In fact, with Trane's ensures further peace of mind with one of the best residential manufacturer’s limited warranties in the industry:
10 years on the compressor
10 years on the outdoor coil
and 10 years on internal functional parts.
At Trane, the commitment to excellence continues long after a product leaves their factory.
bottom of page